International and National Journal Papers

• Wei-Hong, T. and Zaidi, M. R. (2013). Analysis of exhaust muffler with microperforated panel, Journal of Vibroengineering 15(2): 558–573. Thomson ISI, IF:0.66.

• Wei-Hong, T. and Zaidi, M. R. (2016). Optimization of double-layered micro-perforated panels with vibro-acoustic effect, Journal of the Brazilian Society of Mechanical Sciences and Engineering 38(3):745-760. DOI:10.1007/s40430-014-0274-4 Thomson ISI, IF:0.429.

• E.M. Cheng, M. Fareq, Shahriman A. B., Mohd Afendi R., Y. S. Lee, S. F. Khor, W.H. Tan, Nashrul Fazli M.N., A. Z. Abdullah and M. A. Jusoh (2014). Development of Microstrip Patch Antenna Sensing System for Salinity and Sugar Detection in Water, International Journal of Mechanical & Mechatronics Engineering 14(5):31-36.

• E.M. Cheng, M. Fareq, Shahriman A. B., Mohd Afendi, Zulkarnay Z., S. F. Khor, Liyana Z., Nashrul Fazli M. N., W. H. Tan, N. S. M. Noorpi, N. M. Mukhtar and M. Othman (2014). Development of Low Cost Microwave Detection System for Salinity and Sugar Detection, International Journal of Mechanical & Mechatronics Engineering 14(5):59-71.

• E.P. Ooi, R. Daud, N.A.M. Amin, T.W.Hong (2014). Recent development on fracture analysis of solder joints, Applied Mechanics and Materials Vol. 695:680-683. DOI: 10.4028/www.scientific.net/AMM.695.680.

• W. H. Tan, R. Ahmad, N. H. Zunaidi, R. Daud, E.M. Cheng (2015). Development of an Indigenous Impedance Tube, Applied Mechanics and Materials Vol. 786:149-155. DOI:10.4028/www.scientific.net/AMM.786.149.

• E.P. Ooi, R.Daud, N.A.M. Amin, T.W. Hong, M.S. Abdul Majid, M. Afendi, A. Mohamad, A.K. Ariffin (2015). Finite Element Modeling of Intermetallic Compound (IMC) Solder Joints Fracture: Part B, Applied Mechanics and Materials Vol. 786:136-140. DOI:10.4028/www.scientific.net/AMM.786.136.

• Wei-Hong Tan, M. Afendi, R. Ahmad, R. Daud, M. Shukry, E.M. Cheng (2015). Sound Absorption Analysis on Micro-Perforated Panel Sound Absorber with Multiple Size Air Cavities, International Journal of Mechanical & Mechatronics Engineering 15(5):71-76.

• E.M. Cheng, M. F. Abdul Malek, S. F. Khor, K. Y. You, K.Y. Lee, M. A. Rojan, S. Abu Bakar, N. F. Mohd Nasir, Z. Zakaria, and W. H. Tan (2016). Reflection and Dielectric Measurement for Salinity of Water Using Microstrip Loop Antena and Dielectric Probe, International Journal of GEOMATE 11(24):2335-2340. DOI:https://dx.doi.org/10.21660/geomate

• Yakubu Dan-mallam, Tan Wei Hong, Mohd Shukry Abdul Majid (2015). Mechanical Characterization and Water Absorption Behaviour of Interwoven Kenaf/PET Fibre Reinforced Epoxy Hybrid Composite, International Journal of Polymer Science, vol. 2015, 13 Pages. DOI:https://dx.doi.org/10.1155/2015/371958

• Wei-Hong Tan, T.S. Khor, N.H. Zunaidi (2016). Development of Acoustical Simulation Model for Muffler, International Journal of GEOMATE 11(24):2385-2390. DOI:https://dx.doi.org/10.21660/geomate

• Wei-Hong Tan, EA Lim, HG Chuah, EM Cheng, CK Lam (2016). Sound Transmission Loss of Natural Fiber Panel, International Journal of Mechanical & Mechatronics Engineering 16(6):33-42.

• N H Zunaidi, W H Tan, M S A Majid and E A Lim (2017). Effect of physical properties of natural fibre on the sound absorption coefficient, IOP Conf. Series: Journal of Physics: Conf. Series 908 (2017) 012023. DOI:https://doi.org/10.1088/1742-6596/908/1/012023

• W H Tan, J X Cheah, C K Lam, E A Lim, H G Chuah and C Y Khor (2017). Vibration analysis on compact car shock absorber, IOP Conf. Series: Journal of Physics: Conf. Series 908 (2017) 012025. DOI:https://doi.org/10.1088/1742-6596/908/1/012025

• S Amares, E Sujatmika, T W Hong, R Durairaj and H S H B Hamid (2017). A Review: Characteristics of Noise Absorption Material, IOP Conf. Series: Journal of Physics: Conf. Series 908 (2017) 012005. DOI:https://doi.org/10.1088/1742-6596/908/1/012005

• T Y Chen, S F Khan and W H Tan (2017). Influence of processing methods on flexural strength in interwoven hemp/PET reinforced POM hybrid composite, IOP Conf. Series: Journal of Physics: Conf. Series 908 (2017) 012055. DOI:https://doi.org/10.1088/1742-6596/908/1/012055

• T S Fatinah, M S Abdul Majid, M J M Ridzuan, T W Hong, N A M Amin and M Afendi (2017). Tensile properties of compressed moulded Napier/glass fibre reinforced epoxy composites, IOP Conf. Series: Journal of Physics: Conf. Series 908 (2017) 012013 . DOI:https://doi.org/10.1088/1742-6596/908/1/012013

• M.F.Ali, C.K.Lam, K.V.Ch’ng, K.Sundaraj and W.H.Tan (2018). Design and Development of Path Planning Techniques for a Tennis Ball Retriever Robot, Journal of Telecommunication, Electronic and Computer Engineering 10(1-15):59-65.

• W.H. Tan, E.A. Lim, E.M. Cheng, K.S. Basaruddin and M. Hafifi Ramli (2018). Sound Transmission Loss Analysis for Laminated Glass and Perspex, IOP Conf. Series: Materials Science and Engineering 429 012008. DOI:https://doi.org/10.1088/1757-899X/429/1/012008

• M A Che Zulkifli, K S Basaruddin, M Afendi, W H Tan and E M Cheng (2018). Finite Element Simulation on Railway Wheels under Various Loading, IOP Conf. Series: Materials Science and Engineering 429 012002. DOI:https://doi.org/10.1088/1757-899X/429/1/012002

• E.A. Lim, W.H. Tan and A. Kadri (2018). An Improved Fuzzy C-MEANS Clustering Algorithm for RBF Networks, Advance Research Journal of Multi-Disciplinary Discoveries 31(1):1-5.

• E.A. Lim, W.H. Tan and A. Kadri (2018). Dual Search Firefly Algorithm for Function Optimization, Advance Research Journal of Multi-Disciplinary Discoveries 31(1):6-15.

• Tan Wei Hong and C.F. Sin (2018). Sound Transmission Loss Analysis on Building Materials, International Journal of Automotive and Mechanical Engineering, vol. 15, 4 Pages. DOI:https://doi.org/10.15282/ijame.15.4.2018.20.0457

• E.A. Lim, W.H. Tan and A. Kadri (2019). Distance Weighted K-means Algorithm for Center Selection in Training Radial Basis Function Networks, IAES International Journal of Artificial Intelligence 8(1):54-62.DOI:https://doi.org/10.11591/ijai.v8.i1.pp54-62

• E.A. Lim, W.H. Tan and A. Kadri (2019). An Improved Radial Basis Function Networks in Networks Weights Adjustment for Training Real-world Nonlinear Datasets, IAES International Journal of Artificial Intelligence 8(1):63-76.DOI:https://doi.org/10.11591/ijai.v8.i1.pp63-76

• E.A. Lim, W.H. Tan and A. Kadri (2019). An Improved Radial Basis Function Networks Based On Quantum Evolutionary Algorithm For Training Nonlinear Datasets, IAES International Journal of Artificial Intelligence 8(2):120-131.DOI:https://doi.org/10.11591/ijai.v8.i2.pp120-131

• E.A. Lim, W.H. Tan and A. Kadri (2019). A New Formula to Determine The Optimal Dataset Size for Training Neural Networks, ARPN Journal of Engineering and Applied Sciences 14(1):52-61.

• H.G. Chuah, W.H. Tan, B.P. Chang, T.S. Khoo, C.Y. Khor and H.G. How (2019). The Influence of Surface Roughness On Material Dislocation of Microindentation using Bonded Interface Technique, Tribology-Materials, Surfaces & Interfaces:1-6.DOI:https://doi.org/10.1080/17515831.2019.1643074

• Niresh J, Archana N, Karthik T and Tan Wei Hong (2019). Physical, Chemical, Morphological and Thermal Characterization of Natural Fibers for Sound Absorption, Tekstil ve Konfeksiyon 29(3):219-227.DOI:https://doi.org/10.32710/tekstilvekonfeksiyon.375784 Thomson ISI, IF:0.178.

• W. H. Tan, E. A. Lim and K. S. Ong (2019). Analysis of Vibration Level for a Power Tool Using Neural Network, International Journal of Automotive and Mechanical Engineering, Vol. 16, Issue 3, pp 7121-7132. DOI:https://doi.org/10.15282/ijame.16.3.2019.20.0532

• C E Meng, M S A Majid, S A Bakar, N F M Nasir, K S Fhan, Y K Yeow, L K Yee, M R M Jamir, W H Tan, S R Shaharuddin and B C You (2019). Hardened Glass Particle and Carbon Black Using Resin for Potential Electromagnetic Shielding in Biomedical Electronic Equipments, Journal of Physics: Conference Series 1372 012072. DOI:https://doi.org/10.1088/1742-6596/1372/1/012072

• W H Tan, R Haslina, E A Lim and H G Chuah (2019). Optimization of micro-perforated sound absorber using Particle Swarm Optimization (PSO), IOP Conf. Series: Materials Science and Engineering 670 012046. DOI:https://doi.org/10.1088/1757-899X/670/1/012046

• Cheng EM, Lim EA, Tan WH, Mustafa WA, Idrus SS, Nasir NM, Abdulmalek M, Beh HG, Lee YS and Yusop SM (2020). Comparative Study between Wearable Sensor and Cuff Arm Blood Pressure Meter in Measuring Blood Pressure and Heart Rate Monitor Using Statistical Approach, Journal of Physics: Conference Series 1529 022082. DOI:https://doi.org/10.1088/1742-6596/1529/2/022082

• Tan, W.H., Chuah, H.G., Cheng, E.M., Lim, E.A., and Lok, C.H. (2020). In-situ Noise Measurement and Analysis for the Motorcycle Muffler, International Journal of Integrated Engineering, Vol. 12, No 8, pp 44-53.

• Tan, W.H. and Ak, Y.H. (2020). Analysis of Sound Transmission Loss on Perforated-Natural Fibre Sandwich Panels, Journal of Mechanical Engineering, Vol. 17, No 3, pp 27-38.

• Tan, W.H., Amares, S., Faridah, W. and Heng, W.K. (2021). Analysis of Noise Level and Sound Transmission Loss of Noise Barrier Material for the Construction Site, International Journal of Integrated Engineering, 13(4), pp.151-162.

• Tan W. H., Cheng E. M., Lim E. A. and Tan W. C. (2021). Microwave Dielectric Analysis of Thermal Degradation on Vegetable Oils, ARPN Journal of Engineering and Applied Sciences 16(14):1448-1455.

• W.H. Tan, A.B. Shahriman, C.Y. Teoh and C.H. Lee (2022). Structure Dynamic Analysis on Mobility Robot Footrest for Adult Male, ARPN Journal of Engineering and Applied Sciences 17(9):947-957.

• W.M. Kok, H.G. Chuah, H.G. How, Y.H. Teoh, H.M. Yee and W.H. Tan (2022). Quantifying Geometrically Necessary Dislocation with Surface Roughness Effect in Copper (111) under Indentation, Materials Science and Technology. DOI: https://doi.org/10.1080/02670836.2022.2110700, SCIE, IF:2.06 (Q2)

• Tan W. H., Cheng E. M., Lim E. A., Tan W. C. and Amaresh S. G. (2022). Acoustical Simulation and Analysis on the Resonator Muffler, ARPN Journal of Engineering and Applied Sciences 17(20):1828-1833.

• Cheng E. M., Shahriman A. B., Tan W. H., Mohd. Afendi R., Khor S. F., Nashrul Fazli M. N., Che Wan Sharifah Robiah M. and You K. Y. (2022). Microwave Reflection Measurement on Thermal Degradation of Animal and Vegetable Oils, ARPN Journal of Engineering and Applied Sciences 17(20):1865-1869.

• Yung, T. C., J.S. Pang, M.N. Abdul Hamid, L.E. Ooi and Tan W. H. (2022). Ultrasonic Guided Wave Testing on Pipeline Corrosion Detection using Torsional T(0,1) Guided Waves, Journal of Mechanical Engineering and Sciences, 16(4):9157–9166.

• Yung, T. C., Lim, J., M.N. Abdul Hamid, L.E. Ooi and Tan W. H. (2023). Suppression of Flow-Induced Noise of a Canister Vacuum Cleaner, International Journal of Integrated Engineering, 15(1):180–190.

• Tan W. C., Lim E. A., Cheng E. M., Tan W. H. and Rahman H. A. (2023). Numerical Analysis on the Effect of Diluted Hydrogen Fuel by a Fixed Amount of Supplied Hydrogen using a Quasi-Theree-Dimensional Solid Oxide Fuel Cell Model, ARPN Journal of Engineering and Applied Sciences 18(6):1865-1869.

• Meng, C.E., Hong, T.W., Choon, T.W. and Aik, L.E. (2023). Microwave Absorption Analysis on Heated Edible Spirulina with Various Temperatures, ARPN Journal of Engineering and Applied Sciences 18(9):1031-1038.

• Madvari, R.F., Jafari, M.J., Hong, T.W., Laal, F. and Sharak, M.N. (2023). Effect of Porosity, Pore Size, and Pore-opening Size Optimized on the Sound Absorption Coefficient of Aluminum Foam, Noise Control Engineering Journal, 71(2):92–100. DOI: https://doi.org/10.3397/1/37718, SCIE, IF:0.4 (Q4).

• Teoh, C.Y., Wong, J.K., Ko, Y.H., Muhammad Najib, A.H., Ooi, L.E., and Tan, W.H. (2023). Design of Two-Stage Force Amplification Frame for Piezoelectric Energy Harvester, Journal of Mechanical Engineering, Vol. 20, No 3, pp 49-62. DOI: https://doi.org/10.24191/jmeche.v20i3.23900

• Hong, T.W., Wahab, F., Jian, L.J. and Ishak, S.H. (2023). Sound Absorption Coefficient Measurement and Analysis of Bio-Composite Micro Perforated Panel (BC-MPP), Journal of Mechanical Science and Technology, 37(7):3327–3334. DOI: https://doi.org/10.1007/s12206-023-2211-x, SCIE, IF:1.6 (Q3).

• Tan, W. H., Hafiz, N. M., Chan, C. K. and Niresh, J. (2023). Acoustical Analysis for the Lecture Rooms in UniMAP, ASEAN Engineering Journal, 13(4):87–93. DOI: https://doi.org/10.11113/aej.v13.19417

• Wahab, F., Hong, T.W., Azhar, M.H.M. and Rahman, N.H.H.A. (2023). Acoustic Characteristic of Bio-composite Micro-perforated Panel (BC-MPP) backed with Natural Fiber, Journal of Mechanical Science and Technology, 37(11):5823 – 5829. DOI: https://doi.org/10.1007/s12206-023-1021-5, SCIE, IF:1.6 (Q3).

• Mohammadi, M., Taban, E., Tan, W. H., Din, N. B. C., Putra, A., and Berardi, U. (2024). Recent Progress in Natural Fiber Reinforced Composite as Sound Absorber Material, Journal of Building Engineering, 84:1-30. DOI: https://doi.org/10.1016/j.jobe.2024.108514, SCIE, IF:6.4 (Q1).

• Jia-Ni, L., Liew, Y. M., Cheng-Yong, H., Wei-Hong, T., Ken, P. W., Pakawanit, P., Hoe-Woon, T., Yong-Jie, H., Shee-Ween, O. & Wan-En, O. (2024). Unveiling Physico-mechanical and Acoustical Characteristics of Fly Ash Geopolymers through the Synergistic Impact of Density and Porosity, Journal of Building Engineering, 91:1 – 16. DOI: https://doi.org/10.1016/j.jobe.2024.109684, SCIE, IF:6.4 (Q1).

• Tan, W.H., Wahab, F., Mat, F., Chan, C.K., Teoh, R.J. (2024). Sound Absorption Coefficient Measurement and Analysis for Multisection Perforation Microperforated Panel, Journal of Mechanical Science and Technology, 38(6):2797–2803. DOI: https://doi.org/10.1007/s12206-024-2210-6, SCIE, IF:1.5 (Q3).

• Singh, M., Choo, H.L., Tan, W.H. and Durairaj, R. (2024). Effect of Mo and ZrO2 Nanoparticles Addition on Interfacial Properties and Shear Strength of Sn58Bi/Cu Solder Joint, Transactions of Nonferrous Metals Society of China (English Edition), 34(8):2619 – 2628. DOI: https://doi.org/10.1016/S1003-6326(24)66564-7, SCIE, IF:4.7 (Q1).

International and National Conference Papers

• Wei-Hong, T. and Zaidi, M. R. (2010). Transmission loss analysis of muffler with micro-perforated panel, Proceedings of the 2010 International Conference on Advances in Mechanical Engineering (ICAME 2010), SACC Selangor.

• Wei-Hong, T. and Zaidi, M. R. (2011). Acoustical simulation analysis of muffler with micro-perforated panel and experimental verification, The 1st International Malaysia-Ireland Joint Symposium on Engineering, Science and Business (IMiEJS 2011), Athlone Institute of Technology (AIT), Ireland.

• E.P. Ooi, R. Daud, N.A.M. Amin, T.W.Hong (2014). Recent development on fracture analysis of solder joints, World Virtual Conference on Advanced Research in Materials and Engineering Applications, Kuala Lumpur, Malaysia.

• Wei-Hong, T., Rosmaini A., Daud R., and Cheng E.M. (2015). Development of an indigenous impedance tube, International Conference on Applications and Design in Mechanical Engineering (ICADME 2015), March 30-31, 2015, Penang, Malaysia.

• E.P. Ooi, R.Daud, N.A.M. Amin, T.W. Hong, M.S. Abdul Majid, M. Afendi, A. Mohamad, A.K. Ariffin (2015). Finite Element Modeling of Intermetallic Compound (IMC) Solder Joints Fracture: Part B, International Conference on Applications and Design in Mechanical Engineering (ICADME 2015), March 30-31, 2015, Penang, Malaysia.

• Wei-Hong, T., T.S. Khor, N.H. Zunaidi (2015). Development of Acoustical Simulation Model for Muffler, First International Conference on Science, Engineering & Environment (SEE 2015), November 19-21, 2015, Tsu City, Mie, Japan.

• Lim Eng Aik, Lam Chee Kiang, Tan Wei Hong, Mohd Syafarudy Abu (2016). The SIR Model of Zika Virus Disease Outbreak in Brazil at Year 2015, The International Conference on Education, Mathematics and Science 2016 (ICEMS2016), November 19, 2016, UPSI Tanjung Malim, Perak, Malaysia.

• Lim Eng Aik, Lam Chee Kiang, Zulkifley Bin Mohamed, Tan Wei Hong (2016). A Review on the Multivariate Statistical Methods for Dimensional Reduction Studies, The International Conference on Education, Mathematics and Science 2016 (ICEMS2016), November 19, 2016, UPSI Tanjung Malim, Perak, Malaysia.

• N.H. Zunaidi, Wei-Hong Tan, M.S. Abdul Majid (2016). A Preliminary Study of Sound Absorption Coefficient for Natural Fibres, Second International Conference on Science, Engineering & Environment (SEE 2016), November 21-23, 2016, Osaka City, Japan.

• Wahab, F., Andrew, A.M., Azizan, N.Z.N., Ragunathan, S., Seman, N.A.A., Tan, W.H., Munaaim, M.A.C. and Seah, S.Y. (2021). Study on the opportunity of carbon footprint reduction through energy measurement by implementing good operating practices in PVC flooring mat manufacturing industry, IOP Conference Series: Earth and Environmental Science (Vol. 765, No. 1, p. 012036).

• Amirah, A.S.N., Ragunathan, S., Zainab, N.A.N., Andrew, A.M., Faridah, W., Tan, W.H. and Salwa, Z.M. (2021). The use of media filters in treatment of runoff pollution, IOP Conference Series: Earth and Environmental Science (Vol. 646, No. 1, p. 012034).

• Amirah, A.S.N., Tan, W.H., Faridah, W., Andrew, A.M., Zainab, N.A.N., Ragunathan, S. and Salwa, Z.M. (2021). A study of water distribution near Taman Seri Wang, Arau, Perlis, IOP Conference Series: Earth and Environmental Science (Vol. 646, No. 1, p. 012035).

• Faridah, W., Andrew, A.M., Zainab, N.A.N., Ragunathan, S., Amirah, A.S.N., Tan, W.H. and Iqbal, C.M.M.N. (2021). Characterization and Properties of Pp/Nbrr/Kenaf Composites with Epoxy Resin Compatibilizer, Intelligent Manufacturing and Mechatronics, pp. 801-809.

• Ragunathan, S., Zainab, N.A.N., Andrew, A.M., Faridah, W., Tan, W.H., Amirah, A.S.N. and Othman, N.S. (2021). Fabrication and Mechanical Testing of Blended PVOH/Kenaf Reinforced Starch Composite for Future Packaging Application, Intelligent Manufacturing and Mechatronics, pp. 777-784.

• Faridah, W., Andrew, A.M., Zainab, N.A.N., Ragunathan, S., Amirah, A.S.N., Tan, W.H. and Hidayah, A.W.N. (2021). Characterization of PP/NBRr/Kenaf Composites with and Without NaOH Treatment, Intelligent Manufacturing and Mechatronics, pp. 811-817.

• Ragunathan, S., Zainab, N.A.N., Andrew, A.M., Faridah, W., Amirah, A.S.N., Tan, W.H. and Othman, N.S. (2021). Characterization and Properties of PP/NBRv/Kenaf Fibre Composites with Silane Treatment, Intelligent Manufacturing and Mechatronics, pp. 785-791.

• Andrew, A.M., Zainab, N.A.N., Amirah, A.S.N., Ragunathan, S., Tan, W.H., Faridah, W. and Rezal, S. (2021). Phyton-Based Smart Algorithm for 3× 3 Rubik’s Cube Solver, Intelligent Manufacturing and Mechatronics, pp. 1205-1216.

• Zainab, N.A.N., Andrew, A.M., Ragunathan, S., Amirah, A.S.N., Tan, W.H., Faridah, W. and Mah, C.C. (2021). Performance of Concrete Gravity Dam with Different Height of Dam and Water Level Under Seismic Loadings, Intelligent Manufacturing and Mechatronics, pp. 661-672

• Zainab, N.A.N., Amirah, N., Tan, W.H., Faridah, W., Andrew, A.M. and Ragunathan, S. (2021). Development of Fragility Curve of Reinforced Concrete Buildings with Different Height Based on Dynamic Analysis, Intelligent Manufacturing and Mechatronics, pp. 639-649.

• Andrew, A.M., Faridah, W., Tan, W.H., Ragunathan, S., Amirah, A.S.N., Zainab, N.A.N. and Lee, F.S. (2021). Prototype Design for Rubik’s Cube Solver, Intelligent Manufacturing and Mechatronics, pp. 39-50.

• Amirah, A.S.N., Tan, W.H., Faridah, W., Andrew, A.M., Zainab, N.A.N., Ragunathan, S. and Helmira, H.N. (2021). A Study to Asses Environmental Knowledge of Homeowner Behaviors Towards Their Lawn, Intelligent Manufacturing and Mechatronics, pp. 1053-1060.

• Faridah, W., Tan, W.H., Amirah, A.S.N., Ragunathan, S., Zainab, N.A.N., Andrew, A.M. and Farhana, A. (2021). Characterization and Properties of PP/NBRr/Kenaf Composites with PPMAH Compatibilizer, Intelligent Manufacturing and Mechatronics, pp. 793-799.

• Amirah, A.S.N., Tan, W.H., Faridah, W., Andrew, A.M., Zainab, N.A.N., Ragunathan, S. and Shahniza, M.S.N. (2021). Assessment of a Self-sustaining Drainage Ditch: Water Quality Monitoring and Sampling, Intelligent Manufacturing and Mechatronics, pp. 1037-1044.

• Zainab, N.A.N., Tan, W.H., Faridah, W., Andrew, A.M., Ragunathan, S. and Amirah, A.S.N. (2021). Evaluate the Performance of Regular and Irregular Shape of Building Based on Dynamic Analysis, Intelligent Manufacturing and Mechatronics, pp. 651-660.

• Tan, W.H., Amirah, A.S.N., Ragunathan, S., Zainab, N.A.N., Andrew, A.M. and Faridah, W. (2021). Development a Cost-Effective Impedance Tube for Sound Transmission Loss Measurement, Intelligent Manufacturing and Mechatronics, pp. 1217-1226.

• Tan, W.H., Faridah, W., Andrew, A.M., Zainab, N.A.N., Ragunathan, S., Amirah, A.S.N. and Lim, E.A. (2021). Mathematical Modelling Development of Sound Transmission Loss for Laminated Glass Using Response Surface Methodology, Intelligent Manufacturing and Mechatronics, pp. 1227-1236.

• Tan, W.H., Amirah, A.S.N., Ragunathan, S., Zainab, N.A.N., Andrew, A.M., Faridah, W. and Lim, E.A. (2021). Acoustical Analysis and Optimization for Micro-Perforated Panel Sound Absorber, Intelligent Manufacturing and Mechatronics, pp. 587-598.

• Tan, W.H., Amirah, A.S.N., Ragunathan, S., Zainab, N.A.N., Andrew, A.M. and Faridah, W. (2021). Analysis of Vibration for Grass Trimmer, Intelligent Manufacturing and Mechatronics, pp. 575-585.

• Zainab, N.A.N., Faridah, W., Andrew, A.M., Ragunathan, S., Amirah, A.S.N. and Tan, W.H. (2021). Performance of concrete gravity dam with various height of dam based on static pushover analysis, AIP Conference Proceedings, Vol.2347, No.1, p.020019.

• Andrew, A.M., Zainab, N.A.N., Amirah, A.S.N., Ragunathan, S., Tan, W.H., Faridah, W. and Asri, A.A.A. (2021). Smart SMS-based appointment management system for hospitals in rural area, AIP Conference Proceedings, Vol.2347, No.1, p.020010.

• Andrew, A.M., Faridah, W., Tan, W.H., Ragunathan, S., Amirah, A.S.N., Zainab, N.A.N. and Tajudin, A.F.M. (2021). Smart Android based health diagnostic shoe using acupuncture points, AIP Conference Proceedings, Vol.2347, No. 1, p.020207.

• Andrew, A.M., Faridah, W., Tan, W.H., Ragunathan, S., Amirah, A.S.N., Zainab, N.A.N. and Yi, T.P. (2021). Development of smart GPS-based nurse following robot, AIP Conference Proceedings, Vol.2347, No.1, p.020006.

• Tan, W.H., Faridah, W., Andrew, A.M., Zainab, N.A.N., Ragunathan, S. and Amirah, A.S.N. (2021). Failure analysis of leaf spring for commercial vehicle, AIP Conference Proceedings, Vol.2347, No.1, p.020009.

• W H Tan, M Ashraf, L E Ooi and J Niresh (2021). Static and Dynamics Analysis of Bicycle Frame, Journal of Physics: Conference Series 2051 012032. DOI:https://doi.org/10.1088/1742-6596/2051/1/012032

• W H Tan, W C Lo, C Y Teoh and E M Cheng (2021). Structural Analysis on the Coil Spring of Motorcycle Suspension System, Journal of Physics: Conference Series 2051 012031. DOI:https://doi.org/10.1088/1742-6596/2051/1/012031

• Tan, W.C., Lim, E.A., Cheng, E.M. and Tan, W.H. (2022). Numerical Analysis of the Effect of Pore Size Toward the Performance of Solid Oxide Fuel Cell, Lecture Notes in Electrical Engineering, Vol: 829, pp. 150-155. DOI: https://doi.org/10.1007/978-981-16-8129-5_24

• Lim, E.A., Tan, W.C., Tan, W.H. and Cheng, E.M. (2022). Improved K-Means Clustering for Initial Center Selection in Training Radial Basis Function Networks, Lecture Notes in Electrical Engineering, Vol: 829, pp. 99-105. DOI: https://doi.org/ 10.1007/978-981-16-8129-5_16

• Cheng, E.M., Tan, W.H., Tan, W.C. and Lim, E.A. (2022). Microwave Dielectric Properties and Absorption Analysis for Seashells Through Transmission-Reflection Method Using Waveguides, Lecture Notes in Electrical Engineering, Vol: 829, pp. 991-996. DOI: https://doi.org/ 10.1007/978-981-16-8129-5_151

• Teoh, C.Y., Hong, D.T.T., Ooi, L.E.,Tan, W.H. and Hamid, M.N.A. (2022). Performance Analysis of Dual-Axis Stepper Motor Solar Tracker System, AIP Conference Proceedings, Vol.2644, p.184130.

• Singh, A., Durairaj, R., Natarajan, E., Tan, WH, and Janasekaran, S. (2023). Thermal, Microstructure, and Hardness Properties of Molybdenum Nanoparticles Added Tin-Bismuth Solder Alloy for Low-Temperature Soldering Application, Lecture Notes in Mechanical Engineering, pp. 31-42. DOI: https://doi.org/10.1007/978-981-19-3053-9_3